Clicomm CWP-100 Manuale Utente

Usually, users use this function when he wants to call a remote VoIP device 

directly with IP address without server registration. 

 

 

① 

Input the values as below and click the [Insert] button and then the [save] button. 

 

  In case the user dials the phone number that starts with 00 and press ‘#’ to make an outgoing call, the 

CWP-100 will eliminate the first 2 digits, add “555” at the front as prefix and add “1004” at the end as 

postfix and then attempt the outgoing VoIP call with the final phone number.   

 

② 

Input the values as below and click the [Insert] button and then the [save] button. 

 

‘?’ indicates any single digit. Thus in case the user dials a phone number of three or more digits that ends 

with 77, the CPW-100 will reject the attempt and terminate the outgoing call immediately since the “Block” 

parameter is checked.   

 

③ 

Input the values as below and click the [Insert] button and then the [save] button. 

 

In case the user dials the phone number that starts with 8, the CWP-100 will eliminate one digit at the front 

and attempt the outgoing VoIP call to 192.168.0.41. 

 

 

 

④ 

The final dial plan scenario s as follows.