Clicomm CWP-100 Manuale Utente

 

34

 

When the user picks up the handset and dial the phone number, the CWP-100 starts searching the 
pattern that coincide with the recent dial plan entries (from the bottom to the top).   

 

 

In case the user dial “00123” and press “#” to make an outgoing call; 

 The CWP-100 will edit the final dialing number as “5551231004” and attempt the outgoing VoIP call. 

 

 

In case the user dial “85556677” and press “#” to make an outgoing call; 

 The CWP-100 will edit the final dialing number as “5556677” and attempt the outgoing VoIP call to 

“192.168.0.41”. 

 

 

In case the user dial “5550001” and press “#” to make an outgoing call; 

 The CWP-100 will not edit the final dialing number since there is no pattern that coincide with the dial plan 

entries, and attempt the outgoing call to “5550001” 

 
9.3.4.2.   Miscellaneous Functions 

Last Digit 

Configuration 

Press SEND after dialing the phone number to assign that the dialing 

is completed and attempts the outgoing call. The user may set the 

CWP-100 to attempt the outgoing cal after an assigned time without 

pressing SEND. 

Use 

“SEND” 

button 

Use Speed 

Dial 

Enable the speed dial function. 

disable 

Speed Dial 

Setting 

The user can assign up to 20 speed dial numbers for the phone 

numbers or IP addresses that are mainly used.   

N/A 

 

   

 

The CWP-100 can enable NAT traversal when the CWP-100 has a private IP behind NAT environment. Then 
the CWP-100 is able to make and receive external VoIP calls behind NAT. The user may use the external 
STUN server or directly use the NAT router’s IP address to use NAT traversal. 

 

NAT Traversal 

Select NAT traversal. 

Not Use : Do not use NAT. 

STUN : Use NAT traversal through STUN server. 

Manual : Use NAT traversal manually when there is no appropriate 
STUN server.   

Not Use