Clicomm CWP-100 Manuale Utente
35
STUN Server
(FQDN) for
STUN
Assign STUN server address and server port when using NAT traversal
through “STUN.”
through “STUN.”
Ex) stun.Clipcomm.co.kr:3478
N/A
NAT Router IP
for Manual
Use
Assign the NAT router’s external IP address of the network that CWP-
100 is connected while using NAT Traversal manually when there is no
appropriate STUN server.
100 is connected while using NAT Traversal manually when there is no
appropriate STUN server.
The user should assign the SIP local port, RTP port, CWP-100 IP
address etc that the CWP-100 uses behind NAT router. Setting up these
ports is called Port mapping, which enables the CWP-100 to run behind
the NAT router.
address etc that the CWP-100 uses behind NAT router. Setting up these
ports is called Port mapping, which enables the CWP-100 to run behind
the NAT router.
N/A
NAT Keep
Alive Interval
Assign the packet transmit periodic time so that the CWP-100 maintains
the connection when it uses NAT traversal. Then the NAT router will be
able to keep the CWP-100 IP and port information continuously.
the connection when it uses NAT traversal. Then the NAT router will be
able to keep the CWP-100 IP and port information continuously.
30s