Philips HEARTSTART XLT M3500B Manuale Utente
Applying the Sensor
5-5
5
Applying the Sensor
Follow the manufacturer’s directions for applying and using the sensor, mak-
ing sure to observe any warnings or cautions. For the best results:
ing sure to observe any warnings or cautions. For the best results:
z
Make sure the sensor is dry.
z
If the patient is moving, secure the sensor cable loosely to the patient.
z
Avoid excessive pressure at the sensor site; ensure that circulation is
not obstructed.
not obstructed.
z
Keep power cables away from the sensor cable and connection.
z
Avoid placing the sensor in an environment with bright lights (if nec-
essary, cover the sensor with opaque material).
essary, cover the sensor with opaque material).
z
Avoid placing the sensor on any extremity with an arterial catheter,
blood pressure cuff, or intravascular venous infusion line.
blood pressure cuff, or intravascular venous infusion line.
WARNING
Failure to apply the sensor properly may reduce the accuracy of the SpO
2
measur-
ment.
WARNING
Inspect the sensor application site at least every two hours for changes in skin qual-
ity, correct optical alignment, and proper sensor application. If skin quality is com-
promised, change the sensor site. More frequent checking may be required due to an
individual patient’s condition.
ity, correct optical alignment, and proper sensor application. If skin quality is com-
promised, change the sensor site. More frequent checking may be required due to an
individual patient’s condition.