Hughes AN6-098P Manuale Utente

 

Figure 48 shows the mechanical adjustments for azimuth, 
elevation, and polarization. All pointing adjustments require a 
½-inch wrench.   

Detailed procedures for adjusting the antenna are included in the 
sections that follow. As you make pointing adjustments, tighten 
the lockdown nuts or bolts enough to prevent movement of the 
antenna reflector. When you are done pointing, you fully tighten 
all lockdown nuts and bolts.

Figure 48:  Pointing adjustments on the antenna—elevation, polarization, and azimuth 

Note:

The elevation lockdown hardware shown in Figure 48

 

may 

be two nuts or two bolts (one on each side of the Az/El assembly).

Canister nuts (3). 
Loosen to adjust 
azimuth.

Polarization 
lockdown 
nuts (4)

Elevation 
scale

Elevation lockdown bolts (2)

(coarse elevation adjustment)

(The polarization scale is shown 

in Figure 51 on page 63.)

Fine elevation 
adjustment nuts

Fine elevation 
adjustment rod