Garmin 010-11099-10 Manuale Utente

If the steering system in your boat does not match any of the hydraulic layouts in this manual and you are unsure how to install the pump, contact 

Garmin Product Support.
Before you start the pump installation, identify the type of hydraulic steering system in your boat. Each boat is different, and you must consider 

certain aspects of the existing hydraulic layout before deciding where to mount the pump. 

➊

Shadow Drive

➋

Port line

➌

Return line

➍

Pump

➎

Starboard line

➏

Shut-off valves

➐

Helm

➑

Steering cylinder

•  The pump must be reconfigured if the boat is equipped 

with an unbalanced steering cylinder (

).

•  The pump should be mounted the pump horizontally 

if possible. 

•  If the pump must be mounted vertically, mount it with 

the hydraulic connections facing upward.

•  Garmin recommends using the t-connector method 

to connect the hydraulic lines to the pump. See the 

diagram 

method.

•  To allow for easy pump disabling and removal, 

Garmin recommends installing shut-off valves in 

the hydraulic lines between the pump manifold and 

t-connectors.

➊

➏

➎

➍

➌

➋

➐

➏

➏

➑