LXE Home Security System E-EB-VX6UG-E Manuale Utente

 

 

LXE offers a replaceable touchscreen protective film to protect the touchscreen when the VX6 

is used in an abrasive environment. 

Make sure both the touchscreen and protective film are clean and dry before installation.  

Please review “Cleaning the Display”, later in this guide, for instructions on suitable cleaning 

agents. 
Center the protective film over the touchscreen.  The antiglare side must be facing outward.  

Do not cut or trim the protective film. 
The protective film is approximately 1/10” (2.54cm) larger than the touchscreen at the centers 

of the edged (indicated by the arrows in the figure above). 
Slide the protective film so that one of the edges of the film can be slid between the 

touchscreen and display housing when the protective film is re-centered on the touchscreen.  

Repeat for the other three edges, ensuring the protective film is centered over the 

touchscreen when finished. 

To remove the protective film, slide the protective film in one direction until the edge clears.  

Lift up on the edge of the film so it does not slide between the touchscreen and display 

housing when slid back.  Repeat until all edges are free and remove the protective film.