LXE Home Security System E-EB-VX6UG-E Manuale Utente

 

 

The optional UPS battery pack must be mounted remotely when using the RAM mount system 

or a U-bracket designed for a previous model LXE computer.  The remote mount can also be 

used with the VX6 U-bracket assembly if it is not convenient to mount the UPS battery pack to 

the U-bracket. 
A six foot extension cable is available to connect the UPS battery pack to the VX6. 

1
. 

Position the UPS battery pack to allow cables to reach the vehicle battery and the VX6. 

2
. 

Attach the UPS battery pack to the vehicle mounting surface using two 1/4 bolts, lock 
washers and flat washers (or equivalent) fasteners. 

Note:1/4 Bolts and washers not included.

 

 

Mount to the most rigid surface available. 

Several antenna options are available for the VX6.  Options include single or dual external 

antennas, remote vehicle mount antennas and an internal antenna. 

Note:  VX6’s are equipped with a wireless device and require an antenna.  Some VX6’s may be 

equipped with a dual antenna option.  For these VX6’s, an external antenna must be 

connected to each antenna connector. 

Place the antenna over the antenna connector. Push down and twist clockwise until the 

antenna is secured.   Repeat for second antenna connector, if present. 
Adjust the antenna angle to improve RF communications with the computer network. 

Note:  Substitution of antennas is not permitted unless authorized by LXE. Use of unauthorized 

antennas will void the FCC emissions certification of the VX6.