Philips WP3810 Manuale Utente
Do not store purified water to avoid contamination. Air contact
contaminates purified water quickly. If you want to store purified
water, use a clean container and keep it in the refrigerator. Do not
keep it in the refrigerator longer than 1 day to avoid contamination.
Features
Philips’ multi-filtration system consists of a primary filter, a secondary
filter, a high-tech hollow-fibre membrane filter and a granular
activated carbon filter.
The hollow fibre membrane contains 520 billion micropores
(WP3811) or 400 billion micropores (WP3810) that are small
enough to remove particles down to 0.1µm. It eliminates 99.99%* of
bacteria, rust and other particles larger than the micropore size
from your tap water without removing calcium, magnesium and other
minerals that are vital to your body. (* tested according to Japanese
Water Purifier Association (JWPA) standard).
The granular activated carbon removes the unpleasant chlorine smell
and taste from your tap water.
Apart from the recommended cartridge lifetime, Philips’ unique
cartridge replacement indicator helps you determine when to replace
the filter cartridge.
Preparing for use
Before installation
Before you install the water purifier, make sure all tap-mounting
Before you install the water purifier, make sure all tap-mounting
adapters you require are present.
The tap must have a diameter of 13mm-25mm.
Determine what type of tap you have and select the appropriate
adapter.
The adapters supplied make the water purifier suitable for almost
any kitchen tap. However, the water purifier may not fit some
uncommon types of taps.
The tap water pressure has to be between 0.7kgf/cm² (7 metres of
water column) and 3.5kgf/cm² (35 metres of water column). If you
use the water purifier at a water pressure outside this range, either
-
-
-
-
-
-
-
-
-
-
English