Shoprider 858WM Manuale Utente

3/28/2008

The Joystick Controller (VSI)

1. On-Off Button: This button turns the joystick

controller (hereinafter referred to as VSI) on
and off. Do not use this button to stop the
power chair, except in an emergency.

2. Battery Gauge: This is a 10-segment

display, which indicates if the VSI is switched
on and gives the state of charge of the
battery. Additionally, any faults in the
Powerchair electrical system are also
indicated by this display. Refer to Table 1 for
more details.

3. Maximum Speed Indicator: This is a 5-

segment display, which indicates the
maximum speed setting selected.

4. Horn Button: This button operates the

Powerchair’s horn.

5. Speed Decrease Button: This button

decreases the maximum speed.

6. Speed Increase Button: This Button

Increases the maximum speed.

7. Joystick: This controls the speed and direction of the Powerchair.

Push the joystick in the direction you want to go. The further you
push it, the faster the speed will be. Releasing the joystick will
automatically engage the brakes and stop the Powerchair.

8. Charging Port: This is the primary charging port for the 6Runner.

When using this charging port only plug into this port with the
qualified Shoprider charger certified by the original manufacturer of
the Powerchair. This port should not be used as a power supply for
any other electrical devices. Doing either of these as stated above
will void the warranty of the Powerchair.

Note: The controller can be fitted to suit either right or left-handed
users. Please contact your provider for further assistance.

Figure 3