Shoprider 858WM Manuale Utente

Pagina di 24
 
3/28/2008 
14
The Powerchair will not function while the drive 
mechanism is disengaged (in freewheel).
   
Both left and right sides must be in drive mode for power chair 
to operate. Otherwise the Powerchair motors will spin, but the 
unit will not move, until both freewheel levers are engaged. Unit 
will spin in circles if only one side is in drive mode. 
*** DO NOT PUT INTO DRIVE MODE WHILE MOTORS ARE 
SPINNING **** 
6Runner – 888WNLM, 888WNLLHD & 858WM 
The drive/freewheel levers are found toward the rear of the Powerchair 
on 888WNLM and 888WNLLHD (Figure 4A). On the 858WM freewheel 
levers are located under the front part of the seat (Figure 4B), both 
have yellow colored handles. These levers will allow you to disengage 
the drive mechanism (When the levers are pulled out away from the 
unit) the Powerchair is in freewheel mode. ***NOTE*** the VSI will not 
work in Freewheel mode. When the levers are pushed in (towards the 
inside of the unit) the motors are engaged and the powerchair is in drive 
mode. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Freewheel lever **NOTE** There is a lever on opposite side 
FIGURE 4A 
Sticker will also help indicate in which position 
the brakes are locked or unlocked. 
FIGURE 4B 
       Freewheel lever