Shoprider 858WM Manuale Utente

 

3/28/2008 

13

LOCK MODE: The VSI controller may be programmed to have a lock 
mode function enabled to prevent unauthorized use. The locking 
method is achieved through a sequence of key presses and joystick 
movements, as detailed below. 
 
To lock Powerchair controller: 

ƒ

  While the controller is switched on, depress and hold the on/off 

button. 

ƒ

  After 1 second the controller will bleep. Now release the on/off 

button. 

ƒ

  Push the joystick forward until the controller bleeps. 

ƒ

  Push the joystick in reverse until the controller bleeps. 

ƒ

  Release the joystick, there will be a long bleep. 

ƒ

  The Powerchair controller is now locked. 

 
To unlock the Powerchair controller: 

ƒ

  Use the on/off button to switch the controller on. The maximum 

speed/profile indicator will be rippling up and down. 

ƒ

  Push the joystick forward until the controller bleeps. 

ƒ

  Push the joystick in reverse until the controller bleeps. 

ƒ

  Release the joystick, there will be a long bleep. 

ƒ

  The Powerchair is now unlocked. 

 
SLEEP MODE: If the controller is left on and not used for more than 
ten minutes, the controller will automatically “go to sleep”. This is 
recognized by a slow intermittent flash of the battery indicator lights. 
Simply turn the controller off and back on to reset. 
 
Always leave the chair in drive mode.  The freewheel option is 
there only to allow the chair to be pushed manually when the need 
arises (i.e., to store or push unit out of a tight space). Following the 
sticker picture put each lever in the direction of the person sitting 
down driving the chair.