Beko DCU 9330 ユーザーズマニュアル

19 EN

- Illuminates when the programme ends.

C  Anti-creasing icon will light up at the 

end of the programme if anti-creasing 

function is active.

You can use this feature to dry your 

laundry in a different programme after your 

machine has started to run. 

For example;

Press and hold the “Start/Pause/Cancel” 

button for about 3 seconds to “Cancel” 

the programme in order to select “Extra 

Dry” programme instead of “Iron Dry” 

programme. Select the “Extra Dry” 

programme by rotating the programme 

knob. Press “Start/Pause/Cancel” button 

to start the programme.

 

C If you select a new programme by 

turning the programme selection knob 

while your machine is running, then 

the current programme is cancelled 

and new programme information is 

displayed.

In order to add or take out laundry after 

the start-up of the programme; 

1. Press the “Start/Pause/Cancel” button 

to switch the machine to “Pause” 

mode. Drying process will stop.

2. Open the door at Pause position and 

close it again after adding or taking out 

laundry.

3. Press “Start/Pause/Cancel” button to 

start the programme.

C Any laundry added after the drying 

process was started may cause the 

already dried clothes in the machine 

intermingle with wet clothes and the 

result will be wet laundry after the 

drying process is over.

CLaundry may be added or taken out 

as much as desired during a drying 

process, but as this process will 

interrupt drying continuously, it will 

extend the programme duration and 

increase energy consumption. 

  Therefore, it is recommended to add 

laundry before the drying programme 

has started.

C If you select a new programme by 

turning the programme selection knob 

while your machine is in standby, then 

the current programme is cancelled 

and new programme information is 

displayed.

There is a child-proof lock to prevent 

any programme interruption due to the 

pressing of button while the programme is 

running. The loading door and all button 

except the “On/Off” button on the panel 

are deactivated when the child-proof lock 

is active.

In order to activate the child-proof lock, 

press on the “audio warning” and “anti-

creasing” buttons simultaneously for 3 

seconds. 

To start a new programme after the 

programme is over or to interrupt the 

programme, the child-proof lock should be 

deactivated. Press the same buttons for 

3 sec. again to deactivate the child-proof 

lock.

Lock symbol will appear on the screen 

when the child-proof lock is activated.

C Child-proof lock will also be deactivated 

when the machine is restarted by 

pressing the on/off button.

When the child-proof lock is activated: 

•  Display icons will not change even if the 

position of programme selection knob 

is changed while the machine is running 

or in halt. 

•  If the child-proof lock is deactivated 

after changing the position of the 

programme selection knob while your 

machine is running, your machine stops 

and new programme information is