Beko DCU 9330 ユーザーズマニュアル

21 EN

There are humidity sensors in your dryer 

that detect whether the laundry is dry or 

not.

To clean the sensor:

1.  Open the loading door of the dryer.

2.  Allow the machine to cool down if 

drying has been carried out.

3.  Wipe the metal sensors with a soft 

cloth, dampened with vinegar and dry 

them.

C  Clean metal sensors 4 times a year.

A Never use solvents, cleaning agents 

or similar substances when cleaning 

since these materials can cause fire and 

explosion! 

Lint and fibres released from the laundry to 

the air during the drying cycle are collected 

in the “Filter Cartridge”. 

CSuch fibre and lint are generally formed 

during wearing and washing.

C  Always clean the filter and the inner 

surfaces of the cover after each drying 

process.

C  You can clean the filter and filter area by 

vacuum cleaner.

To clean the filter:

1.  Open the loading door.

2.  Remove the cover filter by pulling it up 

and open the filter.

3.  Clean lint, fibre, and cotton by 

unravelling by hand or with a soft piece 

of cloth. 

4.  Close the filter and place it back into its

seat.

C Clogging may arise on the filter surface 

after using your machine for some time; 

if this occurs, wash the filter with water 

and dry it before using again. 

C Clean the entire inner surface of the 

door and door gasket by wiping with a 

damp cloth.