Beko DCU 9330 ユーザーズマニュアル
20 EN
displayed
Ending the programme through
cancelling
A new programme can be selected and
started after “Programme cancel” is
activated in order to change the drying
programme.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for
about 3 seconds. “Lint filter cleaning” and
“Water tank” warning symbols light up and
“End” label appears on the screen as a
reminder at the end of this period.
A As the inside of the machine will be
excessively hot when you cancel
the programme while the machine
is running, activate the ventilation
programme to cool it down.
C If you change the position of
programme selection knob while your
machine is running, then the machine
stops, current programme is cancelled
and new programme information is
displayed.
End of programme
“Filter cleaning” and “Water tank” warning
symbols light up and “End” label appears
on the screen in the programme follow-
up indicator when the programme ends.
The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take
the laundry out after the programme
has come to an end.
C Clean the filter after each drying (please
see, Filter cleaning).
C Drain the water tank after each drying
(please see, Water tank)