AT&T E5934B ユーザーズマニュアル

Appendix

CONNECTING...
displays on my
cordless handset

• Ensure that the base is powered up.
• Place the cordless handset in the charger for one minute to allow the

cordless handset and base to resynchronize channels.

• Move the cordless handset closer to the base. You might have moved

out of range.

• If the cordless handset is in its base and the charging light does not

come on, refer to the charge light is off in this troubleshooting guide.

• Reset the base. Unplug the unit’s electrical power. Wait for 15 sec-

onds then plug it back in. Allow up to one minute for the cordless

handset and base to reset.

• Other electronic products can cause interference with your cordless

phone. Try installing your phone as far away from these types of

electronic devices as possible: wireless routers, radios, radio towers,

pager towers, cell phones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless phones.

The batteries
will not hold a
charge

• Charge the battery in the cordless handset for at least 16 hours. For

optimum daily performance, return the cordless handset to its base

when not in use.

• You may need to purchase a new battery, please refer to the batteries

section of this user’s manual.

• Your phone might be malfunctioning. Please refer to the Warranty

section of this user’s manual for further instruction.

• If the cordless handset is in its base and the charging light does not

come on, refer to The charge light is off in this troubleshooting

guide.

Troubleshooting

My cordless
handset isn’t
performing nor-
mally

• Make sure the power cord is securely plugged into the base. Plug the

unit into a different, working electrical outlet not controlled by a wall

switch.