Sharp AY-XPC9JR ユーザーズマニュアル

ページ / 116
GB-12
MAINTENANCE
Be sure to disconnect the power cord from the 
wall outlet or turn off the circuit breaker before 
performing any maintenance.
CLEANING THE FILTERS
The air fi lters should be cleaned every two weeks. 
1
  Turn off the unit.
2
 Remove the fi lters.
   
1
  Lift the open panel.
 
 
2
  Push the air filters up slightly to unlock 
them.
 
 
3
  Pull the air fi lters down to remove them.
3
  Take off the air purifying fi lters from the 
air fi lters.
4
 Clean the fi lters.
Use a vacuum cleaner to remove dust. If the 
fi lters are dirty, wash them with warm water and 
a mild detergent. Dry fi lters in the shade before 
reinstalling.
5
  Reinstall the air purifying fi lters.
6
 Reinstall the fi lters.
   
1
 Reinstall the fi lters in the original positions.
 
 
2
  Close the open panel.
 
 
3
  Push the arrow-marked of the panel fi rmly 
to lock it in place.
CLEANING THE UNIT AND THE 
REMOTE CONTROL
•  Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It 
can cause electrical shock or equipment damage. 
•  Do not use hot water, thinner, abrasive powders or 
strong solvents.
3
1
2
3
1
2
TIPS ABOUT INDICATOR 
PANEL
The indicator panel will change each time 
you press the DISPLAY button in the fol-
lowing manner.
NOTES:
•  The displayed temperatures are rough estimates 
and may vary from the actual temperatures.
•  Temperature display ranges 
  Room temperature: 0°C ~ 40°C ( 
 is displayed 
when less than 0°C and 
 when higher than 40°
C) 
  Outdoor temperature: –9°C ~ 45°C ( 
 is 
displayed when less than –9°C and 
 when 
higher than 45°C)
• 
  is displayed during the first about 0~120 
seconds of operation while the temperatures are 
being detected.
• During SELF CLEAN operation, the indicator 
panel will display remaining time of the operation. 
Room and outdoor temperature will not be 
displayed even if you press the DISPLAY button.
Single use
•  Only the room temperature can be displayed for 5 
seconds when the unit is not in operation.
Multi use
• 
 is displayed for 5 seconds when the unit is not 
in operation.
The room 
temperature is 
displayed
.
The outdoor 
temperature  is 
displayed.
No display.