Bryan Boilers Triple-Flex 150 ユーザーズマニュアル

 

Date:  

8-4-2010 

 

Revision: 0 

 

Form:  

2396

 

 

1.  This jacket access panel will permit access 

to the primary air-to-air exchanger.  

2.  This jacket access panel will permit access 

to the primary air-to-air exchanger and the 
boiler convection tube access panels. 

3.  These jacket access panels will permit 

access to the convection and furnace tube 
access. 

4.  Flame observation port.  This port provides 

visual access to observe the pilot and main 
flame during operation and service. 

5.  This jacket access panel will permit access 

to the majority of the boiler devices. 

 
 

 

 

1.  Main gas inlet connection.  This connection 

is a 2” male national pipe thread. 

2. Condensate Drain Connection.  This 

connection is a 1” male national pipe thread.  
For installation details refer to paragraph 
1.4.5. 

3.  This jacket access panel will permit access 

to the majority of the boiler devices. 

4.  These jacket access panels will permit 

access to the flue collector.  There is no 
practical reason for the removal of these 
panels. 

5.  This jacket access panel will permit access 

to the condensate trap.  The condensate 
trap is provided with a ½” NPT plugged 
connection for cleanout purposes. 

6.  This jacket access panel will permit access 

to the primary air-to-air exchanger. 

 

 
1.  Auxiliary gas shutoff valve actuator. 
2.  Low fire displacement adjustment that can 

be adjusted by removing the cap and 
rotating the slotted screw clockwise to 
increase gas flow and counter-clockwise to 
decrease gas flow. 

13