Heatiator ECO-ADV-WS22 ユーザーズマニュアル

41

Heatilator • ECO-ADV-WS22 • 7057-128C • August 13, 2010

1. Align holes in mounting flange of blower with bolt holes in

appliance. Blower should be positioned at bottom of rear

outer skin as shown in

Figure 41.1.

2. Insert  and  tighten  bolts  supplied  with  the  kit,  securing

blower onto outer wall of appliance.

3  Place  the  bracket  containing  the  snap  disc  and  magnet

under the bottom left rear corner as shown in

Figure 41.1.

See pages 14 and 21 for detailed operating instructions

for the blower and snap disc.

The blower speed control for this unit is adjusted at the factory,

and normally does not require further adjustment.

NOTE: When the speed control is turned clockwise, it

will click on to high speed. Continue to turn the speed

control clockwise to decrease the speed. At full clock-

wise,  the  blower  should  blow  gently,  but  should  not

stop.

MANUAL: Over-rides the 

Snap Disc

AUTO:  Fan will turn ON/OFF 

Automatically by the Snap Disc

Controls the Fan Speed

Snap Disc Bracket 

with Magnet

Blower

Snap Disc