Madrigal Imaging N380S ユーザーズマニュアル
7
Operating Voltage
The Nº380S Preamplifier is set at the factory (internally) for 100V, 120V, 200V,
230V, 220V, or 240V AC mains operation @ 50 or 60Hz. (230V/50Hz only in Euro-
pean Union countries, in compliance with CE regulations.) This voltage setting
cannot be changed by the user.
230V, 220V, or 240V AC mains operation @ 50 or 60Hz. (230V/50Hz only in Euro-
pean Union countries, in compliance with CE regulations.) This voltage setting
cannot be changed by the user.
Make sure that the label on the bottom panel of the Nº380S (adjacent to the AC
cord) indicates the correct AC operating voltage for your location.
cord) indicates the correct AC operating voltage for your location.
If the voltage indicated on your Nº380S is incorrect, or if you wish to change the
AC operating voltage of your Nº380S as the result of moving to a different coun-
try than the one in which you purchased your digital audio processor, see your
Mark Levinson dealer.
AC operating voltage of your Nº380S as the result of moving to a different coun-
try than the one in which you purchased your digital audio processor, see your
Mark Levinson dealer.
The Nº380S is easily powered by a normal 15-ampere AC mains line. If other de-
vices are also powered from the same AC line, their additional power consump-
tion should be taken into account.
vices are also powered from the same AC line, their additional power consump-
tion should be taken into account.