Classe Audio CP-700 ユーザーズマニュアル

13

Pressing the front panel Menu button will call up the main menu system, 
replacing the normal operational menu and status display in the LCD 
touchscreen. 

Much of your interaction with the CP-700 will be via the LCD 
touchscreen (and the CP-700’s supplied remote control). It will usually 
display the various input selection buttons you would use in day-to-day 
operation, along with access to the tape button.

By pressing the Menu button, you can also call up the menu system of the 
CP-700, which gives you control over many of the operational details of 
the preamplifi er, including system setup options, various display options 
(including the language in which the menu system itself displays), and 
several custom-installation capabilities that allow superior integration of 
the CP-700 into complex systems.

For more information, see the section Th

  e Menu System later in this 

manual.

Th

  e front panel Mute button reduces the volume of the preamplifi er to 

zero at the touch of a button. Pressing the button a second time restores 
the volume to its previous setting. Th

  e behavior of the mute can also be 

customized. Setup information on this feature is available in the Volume 
Setup section.

However, if you increase the volume manually (using either the volume 
knob or the remote control) while the Mute button is engaged, the mute 
control will disengage and the volume will be set to zero. Th

 is approach 

is a safety measure, to avoid situations in which the volume might be 
adjusted up while muted, only to then have the system un-muted to an 
unexpectedly high volume.

Th

 e infrared (IR) receiver and transmitter are located behind this 

window. Ordinarily, your Classé CP-700 must be able to “see” the 
remote control from this window in order to respond to remote control 
commands. 

If your preamplifi er will be located behind closed doors, or for any 
other reason will not be able to “see” the remote control during normal 
operation, you may use the rear panel IR input and output mini-jacks and 
an IR repeater system to solve the problem. For more information about 
using an infrared repeater system to route signals to and from the CP-700, 
refer to the section Rear Panel later in this manual, or contact your local 
Classé dealer.