Classe Audio CP-700 ユーザーズマニュアル

15

Connect the analog outputs of any recording device (analog tape recorder, 
digital tape recorder, CD recorder, etc.) you may have to these single-ended 
RCA connectors. You may select to hear the output of your recording 
device by touching the tape button on the main operational screen of the 
CP-700.

Th

  ese RCA jacks accept right-channel and left-channel (single-ended) 

inputs from line-level source equipment such as tuners, CD players, 
and tape decks. Any of these inputs may be selected by touching the 
corresponding button on the main operational screen of the front panel 
touchscreen.

To achieve the best possible results, we suggest that you use only high-
quality, shielded interconnect cables. Please consult with your local Classé 
dealer for advice on the best cables for use in your system.

If you have a turntable you would like to use with the system, an optional 
phono preamplifi er module is available from your Classé dealer. Once 
installed in your preamplifi er, the Line 1 input connectors become your 
phono inputs, and the phono gain control in the menu system becomes 
active, allowing you to select either low gain for all moving-magnet 
(MM) and high-output moving-coil (MC) cartridges, or high gain for 
standard output MC cartridges. (See the section Th

  e Menu System for more 

information.)

Th

 ese XLR jacks accept right-channel and left-channel balanced signals 

from source equipment with balanced outputs. Either of these inputs may 
be selected by touching the corresponding button on the main operational 
screen of the LCD touchscreen.