Gardena R70Li ユーザーズマニュアル

26 - English 

The boundary wire must be laid in line with the rear 
end of the charging station and at least 1.5 metres 
straight out to the right and left of the station. See the 
illustration. If the boundary wire is laid in any other 
way, the robotic lawnmower may find it hard to find 
the charging station.

Use an original coupler if the boundary wire is not 
long enough and needs to be spliced. It is waterproof 
and gives a reliable electrical connection.

Insert both wire ends in the coupler. Check that the 
wires are fully inserted into the coupler so that the 
ends are visible through the transparent area on the 
other side of the coupler. Now press down the button 
on top of the coupler fully. Use a pair of pliers if the 
button on the coupler is difficult to press down by 
hand.