Gardena R70Li ユーザーズマニュアル
English - 27
3. INSTALLATION
3.5 Connecting the boundary wire
Connect the boundary wire to the charging station:
1.
Place the wire ends in the connector:
• Open the connector.
• Place the wire in the connector grip.
2.
Press the connectors together using a pair of
pliers. Press until you hear a click.
pliers. Press until you hear a click.
3.
Cut off any excess boundary wire 1 or 2
centimetres above each connector.
centimetres above each connector.
4.
Press the connector onto the metal pin, marked
with an A, on the charging station.
with an A, on the charging station.
Carefully check that the connector is properly
fitted.
fitted.
IMPORTANT INFORMATION
The boundary wire must not be crossed when
connecting it to the charging station. The
right hand wire end must be connected to the
right hand pin on the charging station and
the left hand wire end to the left pin.
connecting it to the charging station. The
right hand wire end must be connected to the
right hand pin on the charging station and
the left hand wire end to the left pin.
IMPORTANT INFORMATION
The right hand connector must be connected
to the right hand metal pin on the charging
station and the left hand wire end to the left
connector.
to the right hand metal pin on the charging
station and the left hand wire end to the left
connector.