Gardena R70Li ユーザーズマニュアル

English - 29

1.

Run the wire through the slot in the bottom of the 
charger plate.

2.

Fit the connector to the guide wire in the same 
way as for the boundary wire described in 
3.5 Connecting the boundary wire on page 27. 
Connect it to the contact pin on the charging 
station that is labelled “Guide”.

3.

Run the wire at least 2 metres straight out from 
the front edge of the plate.

If the guide wire must be laid in a passage:

The robotic lawnmower follows the guide wire on 
the same side of the wire to and from the 
charging station. This means that the guide wire 
is to the right of the robotic lawnmower when the 
mower travels to the charging station while it is to 
the left of the mower when the mower travels 
away from the charging station.