Gardena R70Li ユーザーズマニュアル

English - 47

Select the percentage that corresponds to the size 
of the remote area relative to the total working 
area. If the remote area is for instance less than 
half of the total working area, then Rarely must be 
selected. If the remote area is for instance half of 
the total working area, Medium must be selected. 
Compare with the examples in 7. Garden 
examples on page54.

The default setting is Rarely.

• Distance

Enter the distance in metres along the guide wire 
from the charging station to the remote area 
where the robotic lawnmower begins mowing.
Tips! Use the Test OUT function to determine how 
far it is to the remote area. The distance, stated in 
metres, will be shown in the robotic lawnmower's 
display.

If the working area contains two remote areas, the 
guide wire should be installed so that it reaches both 
areas. Remote start 1 and Remote start 2  can then 
be combined to steer the robotic lawnmower to each 
area.

The settings for Proportion and Distance are carried 
out in the same way as for Remote start 1.

The default setting is Never.

Take into account that the total figure for Proportion 
cannot exceed 100%. If one has for instance selected 
Often for Remote start 1, then one can only select 
Never or Rarely for Remote start 2.

Guide width is the same for Remote start 1 and 
Remote start 2. In this way, it is the narrowest passage 
along the guide wire that limits the maximum guide 
width.

In the Test settings menu, it is possible to test the 
settings for Remote start 1 and Remote start 2 and 
that the selected Guide width works in the working 
area in question.