Gardena R70Li ユーザーズマニュアル

English - 49

The front of the robotic lawnmower always passes 
the boundary wire by a specific distance before the 
mower turns around. The default distance is 25 cm, 
but this can be changed if required. The minimum 
value is 25 cm and the maximum value is 30 cm.

Now specify the number of centimetres you want the 
robotic lawnmower to pass the boundary wire and 
press OK.

Through this selection, settings relating to security 
and the connection between the mower and the 
charging station can be made.

Enter the new PIN code and press OK. Enter the same 
code again and confirm by pressing OK. When the PIN 
code is changed, a message stating that the PIN code 
has been changed appears in the display momentarily.

Make a note of the new PIN code on the designated 
line in Memo on page 4. 

There are three security levels to choose from: low, 
medium and high Low and medium security prohibits 
access to the robotic lawnmower if the PIN code is 
unknown. High security also includes a warning that 
beeps if the correct PIN code is not entered after a 
designated time period.

Time lock

X

X

X

PIN request

X

X

Alarm

X