Cub Cadet 19A40002100 ユーザーズマニュアル

Open Hood by pushing in on the rear, right-side tab with 

7. 

your right hand, as seen in 1 of Fig. 4-14, and lifting the cover 

with your left hand in the center rear of the bagger cover, 2.

Install the bag assemblies onto the bag support brackets 

8. 

by inserting the front edge in first, as seen in Fig. 4-15, and 

setting the back edge down until it fits into the assembly.

Slide the hinge pin into the hole located on the mounting 

6. 

tab, as in Fig. 4-12.  Use the cut-out window (See inset in 

Fig. 4-12) to line up the hinge pin on the other side and 

push pin all the way in until it reaches the end-stop. At this 

point the pin clips into place and is secured by a tab in the 

bagger cover. See Fig. 4-13.