Cub Cadet 19A40002100 ユーザーズマニュアル

Note: The clevis pin can be fed down through the hitch 

plate and secured underneath with the hairpin clip, or it 

may be easier to feed the clevis pin up through the hitch 

plate hole and secure with the hairpin clip on the topside. 

The latter method may be preferred since it can be easier 

to insert the hairpin clip. Either way will work, the decision 

should be based on operator preference.

Note: If you decided to leave the hitch support only 

finger tight during the assembly process, tighten all of the 

hardware securely at this time.
Install the bagger hanger assembly onto the mounting 

3. 

assembly on the tractor by hooking it over the hitch plate 

in the center, lining up the center mounting hole as seen in 

Fig. 4-7.

Secure the hanger assembly to the mounting assembly 

4. 

using a 5/16” bolt and flange nut provided. See Fig. 4-7.

Install mounting assembly on tractor as follows:

Place the hooked ends of the mounting assembly over 

1. 

the shoulder bolts, as in Fig. 4-5, on the tractor and line up 

the hitch support bracket center hole with the hole on the 

tractor’s hitch.

Install the clevis pin from hardware pack 689-00087 into the 

2. 

tractor’s hitch and secure with a hairpin clip inserted into the 

top hole, which is the hole located closest to the head of the 

clevis pin. See Fig. 4-6.