Cub Cadet CC 550 ES ユーザーズマニュアル

1. 

The cutting height adjustment lever is located above the 

rear left wheel. See Figure 3-8.

a.  Pull the lever out and away from the mower.
b.  Move the lever forward or back for desired cutting 

height.

c.  Release lever towards mower deck.

Refer to the Engine Operation section in the Engine manual for 

additional engine information.
1. 

Add oil provided before starting unit for the first time out 

of the box.

2. 

Service the engine with gasoline as instructed in the 

Engine Operation section of the Engine manual.

Use extreme care when handling 

gasoline. Gasoline is extremely flammable and the 

vapors are explosive. Never fuel the machine 

indoors or while the engine is hot or running. 

Extinguish cigarettes, cigars, pipes and other 

sources of ignition.

3. 

Charge battery as instructed in the Service section of this 

manual (Electric Start Units).

To convert to side discharge, make sure grass catcher is off of the 

unit, the rear mulch plug is removed, and rear discharge door is 

closed.
1. 

On the side of the mower, lift the mulching plug.

2. 

Slide chute hooks under hinge pin on mulching plug 

assembly. Lower mulching plug. See Figure 3-7. Do not 

remove side mulching plug at any time, even when you are 

not mulching.