Cub Cadet CC 550 ES ユーザーズマニュアル

The blade control is attached to the upper handle of the mower. 

Depress and squeeze it against the upper handle to operate the 

unit. Release it to stop engine and blade.

This blade control is a safety device. 

Never attempt to bypass its operations.

The drive control is located on the underside of the upper handle 

and is used to engage the drive. Squeeze it against the upper 

handle to engage the drive; release it to slow down or stop 

mower from propelling. See Figure 4-1.

The cutting height adjustment lever is located above the left 

rear wheel. To adjust the cutting height, refer to the “Assembly & 

Set-Up” Section.

The recoil starter is attached to the right upper handle. Stand 

behind the unit and pull the recoil starter rope to start the unit.

The ignition switch is located on the left side of the handle panel. 

It is used only for the electric starter.

The primer is located on the left side of the 

engine, behind the air cleaner. Pressing the 

primer forces fuel directly into the engine’s 

carburetor to aid in starting the engine.

The mulch plug is used for mulching purpose. Instead of 

collecting the grass clippings in the grass catcher, your mower 

has the option of recirculating the clippings back to the lawn. 

Make sure that the rear discharge door is closed and the grass 

catcher is removed from unit while mulching.