Korg Electric Keyboard ユーザーズマニュアル

Indicates the MIDI channel that will control effect 
dynamic modulation (Dmod), pan following the insert 
effect “Pan (CC#8),” “Send1(MFX1),” and 
“Send2(MFX2).”

An asterisk “*” will be displayed at the right of the channel 
number Ch01–16 for tracks that are routed to an IFX. If mul-
tiple tracks with differing MIDI channel settings are routed, 
these channels specify the channel that will be used to con-
trol the effect.

 Control can be performed from any of 

the MIDI channels of the tracks that are routed.

If “BUS Select” (7.1–1(2)a) is set to DKit for a track in 
which a drum program is selected, the MIDI channel of 
that track will be valid only if this is set to All Rt., 
regardless of the drum kit “BUS (BUS Select)” (GLO-
BAL 5.1–3a) setting or the utility setting “DrumKit IFX 
Patch.”

This displays the settings of the insert effect. The routing, 
specified effect name, and on/off status of the insert effect 
are displayed.

While viewing the map, you can specify the bus where the 
program oscillators for each track 1–16 will be sent.
Use the cursor keys to select the track, and use the [INC]/
[DEC] keys or the [VALUE] dial to set “BUS Select” (7.1–
1(2)a).
This setting can also be made in “BUS Select” (7.1–3a).

■

☞ “Memory Status,” “Solo Selected Track” (1.1–1d), “Copy 

Insert Effect,” (PROG 7.1–1c, 7.1–1b/2b), “DKit IFX 
Patch” (COMBI 7.1–1b), “FF/REW Speed,” “Set Location” 
(1.1–1d), “Select by Category” (PROG 7.1–2c)

Sets the parameters for the effects selected for IFX in the 
Setup page (☞p.164–).

■

☞ “Memory Status” (1.1–1d)

☞ For details on the master effects, refer to p.155 “7. Effect 

Here you can select the type of master effects, turn them on/
off, and make chain and master EQ settings. 
This is the same as Program mode with the exception of 
“MFX1 Control Ch,” “MFX2 Control Ch,” and “MEQ Con-
trol Ch.” (☞PROG 7.2: Ed-MasterFX)

This is the same as in Program mode. Refer to “PROG 7.2–1: 
Setup.” However, unlike Program mode, the master effects 
will be controlled by the MIDI channel specified by “MFX 1, 
2 Control Ch.” The control changes used are the same as in 
Program mode.

Specifies the MIDI channel that will control dynamic 
modulation (Dmod) for the master effects.

: The effect will be controlled on the global MIDI chan-

nel “MIDI Channel” (GLOBAL 2.1–1a).

7.1–4a

7.2–1a

7.2–1b

7.2–1c

7.2–1e

7.2–1d