Sharp UX-B800SE ユーザーズマニュアル

3. Sending 

Fa

x

e

s

Place the document face down with 
the top edge going in first, and 
insert it all the way into the feeder. 
Make sure that the roller draws the 
document in.

•

Display: [

] .

Adjust the resolution and/or contrast 
settings (p. 25), and then dial the 
receiving machine (p. 26).

Open the cover (

➊) and remove the 

document (

➋).

•

Caution: Attempting to remove a 
document without opening the cover 
may damage the feeder mechanism.

You can adjust the resolution and 
contrast before sending a document.

♦

The default resolution setting is 
STANDARD. The default contrast 
setting is AUTO.

♦

Adjust the settings each time you 
don't want to use the default settings.

Note: The resolution and contrast 
settings are only effective for sending; 
not for receiving.

STANDARD

Use STANDARD for 
ordinary documents. 
This provides the fastest 
transmission.

FINE

Use FINE for documents 
containing small letters 
or fine drawings.

SUPER FINE Use SUPER FINE for 

documents containing 
very small letters or very 
fine drawings.

HALF TONE Use HALF TONE for 

photographs and 
illustrations. The original 
will be reproduced in 64 
shades of gray.

AUTO

Use AUTO for normal 
documents.

DARK

Use DARK for faint 
documents.

Close the cover, pressing down 
firmly on both front corners.