Sharp UX-B800SE ユーザーズマニュアル

♦

Documents which are taped, torn, 
smaller than the minimum size, 
carbon backed, easily smudged, or 
have a slick, coated surface should be 
photocopied, and the copy loaded in 
the feeder.

♦

Documents that are curled or have a 
wave-like pattern must be flattened.

Loading up to 20 sheets at once:
5.8” x 5.5” (148 x 140 mm)

14 lbs. (52 g/m

2

)

Loading 1 sheet at a time:
2.8” x 5.5” (70 x 140 mm)

14 lbs. (52 g/m

2

)

Loading up to 20 sheets at once:
Letter (8.5” x 11”, 216 x 279 mm)

20 lbs. (75 g/m

2

)

Loading up to 5 sheets at once:
Legal (8.5” x 14”, 216 x 356 mm)

20 lbs. (75 g/m

2

)

Loading 1 sheet at a time:
Legal (8.5” x 14”, 216 x 356 mm)

42 lbs. (157 g/m

2

)

The maximum scanning width is 8.2” 
(208 mm), and the top and bottom 
0.16” (4 mm) of a document cannot 
be scanned.

Up to 20 letter-size sheets (5 legal-size 
sheets) can be placed in the feeder at 
once. (If the sheets do not feed or 
double feeds occur, reduce the number 
of sheets.) The sheets will feed 
automatically starting from the bottom 
sheet.

♦

To send or copy more than the 
maximum number of sheets, place 
the additional sheets gently in the 
feeder just before the last sheet is 
scanned. Do not force the sheets in, 
as this may cause double-feeding or 
jamming.

♦

For large or thick sheets that must be 
loaded one at a time, insert each 
sheet into the feeder as the previous 
sheet is being scanned. Insert gently 
to avoid double-feeding.

Flip up the feeder cover (

➊) and 

adjust the document guides to the 
width of your document (

➋).

♦

The scanner cannot recognize yellow, 
greenish yellow, or light blue ink.

♦

Remove all clips, staples, and pins  
before loading documents in the 
feeder (these will damage the 
machine).

♦

Ink, glue, or correcting fluid on a 
document must be dry before 
scanning.