Sharp UX-B800SE ユーザーズマニュアル

2. F

a

x to 

E-mail

•

Three digits must be entered in each 
segment of the number (the 
segments are separated by 
periods). If a segment does not have 
3 digits, enter zeros as needed.
Example: IP address = 192.168.1.2
You must enter: 192.168.001.002

•

If you make a mistake, press 

 

to move the cursor to the mistake 
and enter the correct number.

When finished entering the number, 

press .

The next setting will appear in the 
display. Repeat Steps 4 through 6 
to configure the next setting, or 

press  

to 

exit.

If you need to return the network 
settings to their initial state, follow the 
steps below.

•

Initializing the settings enables 
DHCP and clears the IP address 
and related settings.

Press , 

then  

until 

[

NETWORK SETTING] appears

.

Press 

 twice, then 

 to 

show [

INITIALIZE SETTINGS]

. 

Press  

twice.

If your network requires that you assign 
a static (permanent) IP address to the 
machine, follow the steps below to 
disable DHCP (automatic IP address 
assigment) and configure the network 
settings.

•

Consult your network administrator 
for the information that must be 
entered. After DHCP is disabled, the 
settings that must be configured 
appear in the following order (these 
settings only appear when DHCP is 
set to NO):
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS (PRIMARY)
DNS (SECONDARY)

Press , 

then  

until 

[

NETWORK SETTING] appears

.

Press  

twice. 

[DHCP] will appear.

Press 

 for NO (the machine will 

not obtain an IP address 
automatically).

•

[IP ADDRESS] will appear. 
(If you wish to configure a different 

setting, press 

 or 

.) 

Press .

Press the number keys to enter the 
required number.