Siemens PCS7 ユーザーズマニュアル
Product Information
PCS7/TM V2.02
24.10.2001
Siemens AG 2001
5 of 21
These blocks can be installed on demand by checking the component “Standard-OCX renoviert” in the
installation program.
installation program.
2.4 PCS7/TM-OCX (PCS7) (formerly: WinCC/TM-OCX (PCS7))
2.4.1
Modifications vs. Version V2.01
None.
3 General Information About the Installation
Requirements
The software products that are contained on this CD are released under WinCC, Version 5.0/SP2+
HF7, or PCS7, Version 5.2, and Windows NT, 4.0 + SP5. The hardware requirements are listed in the
associated documents (Vertriebsfreigabe zu PCS7/TM, V2.02, in TELEPERM M aktuell).
HF7, or PCS7, Version 5.2, and Windows NT, 4.0 + SP5. The hardware requirements are listed in the
associated documents (Vertriebsfreigabe zu PCS7/TM, V2.02, in TELEPERM M aktuell).
With transition to PCS7, V5.2, the C partition of the used computer must have a memory of at least 4
GByte.
GByte.
Please observe the Chapter 5 “Version Interdependencies” in this document.
3.1 Operation system Windows NT, 4.0, Upgrading to SP5
Note: The PCS 7/TM CD does not contain the operation system Windows NT, 4.0, or any Service
Packs (SP).
Language variants of the SP must be used according to the selection in the base installation.
Packs (SP).
Language variants of the SP must be used according to the selection in the base installation.
To install the NT SP5, load the corresponding Setup.exe. Overwrite older files when the system asks
for file versions during the installation process. Please observe the notes etc. of the SP5.
for file versions during the installation process. Please observe the notes etc. of the SP5.
3.2 Content of the CD
The software components for PCS 7/TM and the documents are supplied on CD-ROM.
CD directory structure under the directory PCS7_Version_5 (excerpt):
CD directory structure under the directory PCS7_Version_5 (excerpt):
- Dok
Contains the product information and all the descriptions in pdf
format (see chapter 4)
format (see chapter 4)
- Siemens
Contains the channel components in an uncompressed form, 2
example projects as well as a part of a project and some Scripts
and functions
example projects as well as a part of a project and some Scripts
and functions
- SW
Contains the installation programs for channel and image blocks
(and additional products)
(and additional products)
- Winnt.400
Contains the old driver software for the N_AT module
3.3 Installation using the Common Installation Mask
This CD is equipped with an “Autorun” facility that automatically starts the installation mask when the
CD is inserted (provided that the computer has been set up for this feature). If this selection has not
been made in your computer, the installation mask can also be initiated by double-clicking on the
setup.exe in the CD’s root directory.
CD is inserted (provided that the computer has been set up for this feature). If this selection has not
been made in your computer, the installation mask can also be initiated by double-clicking on the
setup.exe in the CD’s root directory.
Using the common installation mask it is sufficient to select all components to be installed.
When WinCC/TM is selected, the check is automatically set for the NAT-NPCI driver software. The
check can be removed if this driver software shall not be installed. The language selection in the in-
When WinCC/TM is selected, the check is automatically set for the NAT-NPCI driver software. The
check can be removed if this driver software shall not be installed. The language selection in the in-