Vanguard Managed Solutions 6455 ユーザーズマニュアル
About the Vanguard 6435/6455
1-3
Features
Features
Introduction
This section describes the features available with your Vanguard 6435/6455. For
descriptions of the software running on your Vanguard 6435/6455, refer to the
appropriate protocol document.
descriptions of the software running on your Vanguard 6435/6455, refer to the
appropriate protocol document.
Hardware Features This table lists the hardware features of the Vanguard 6435 and the Vanguard 6455:
Increased Flash
SIMM Memory Size
Expansion
SIMM Memory Size
Expansion
Release 6.2 and greater allows the Vanguard 6435 and 6455 to increase the FLASH
memory and expand the CMEM area. Existing Vanguard 6435 and 6455’s can be
expanded to 12MB FLASH memory as long as the bootprom is also updated. A new
bootprom is required to support the 12MB Flash option with the 128 kbyte CMEM.
To use 128k CMEM, 8 Mbyte FLASH SIMM must be installed and the bootprom
updated. Below are the recommended configurations.
memory and expand the CMEM area. Existing Vanguard 6435 and 6455’s can be
expanded to 12MB FLASH memory as long as the bootprom is also updated. A new
bootprom is required to support the 12MB Flash option with the 128 kbyte CMEM.
To use 128k CMEM, 8 Mbyte FLASH SIMM must be installed and the bootprom
updated. Below are the recommended configurations.
Vanguard 6435:
• SDRAM Expansion 16 Megabyte DIMM standard optional 32 Megabyte.
• 32 Megabyte is recommended when using the 8 Megabyte Flash SIMM.
Vanguard 6455:
• Vanguard 6455: Release 5.6 and greater the Vanguard 6455 ships with the
recommended 32 Megabyte DIMM installed.
• Any Vanguard 6455 equipped with 16MB SDRAM and 8MB FLASH SIMM
should be upgraded to 32MB SDRAM.
Vanguard 6435
Vanguard 6455
Compact, low profile enclosure with
fixed motherboard, and support for
three daughtercards.
fixed motherboard, and support for
three daughtercards.
Low profile enclosure with rear
accessible motherboard, and support for:
accessible motherboard, and support for:
• three daughtercards
• two Vanguard 6455 Option Cards
Motorola MPC860 PowerPC RISC
processor.
processor.
Motorola MPC860 PowerPC RISC
processor.
processor.
4 Megabytes of Non-Volatile FLASH
(can be expanded with optional
SIMMs) and 16 Megabytes of SDRAM
(can be expanded with an optional 32
Megabyte DIMM).
(can be expanded with optional
SIMMs) and 16 Megabytes of SDRAM
(can be expanded with an optional 32
Megabyte DIMM).
Before release 5.6 - 4 Megabytes of Non-
Volatile FLASH (can be expanded with
optional SIMMs) and 16 Megabytes of
SDRAM (can be expanded with an
optional 32 Megabyte DIMM).
Release 5.6 and greater - ships with 32
Megabyte DIMM installed.
Volatile FLASH (can be expanded with
optional SIMMs) and 16 Megabytes of
SDRAM (can be expanded with an
optional 32 Megabyte DIMM).
Release 5.6 and greater - ships with 32
Megabyte DIMM installed.
Standard rear panel ports include:
• Two Sync/Async Ports (with
DB-25 connectors)
• One Ethernet 10BaseT port
• Two Async ports (RJ-45
connectors), one acts as the CTP
Standard rear panel ports include:
• Two Sync/Async Ports (with DB-25
connectors)
• One Ethernet 10BaseT port
• Two Async ports (RJ-45 connectors),
one acts as the CTP