Honeywell HC900 ユーザーズマニュアル
I/O Module Installation and Wiring - I/O Installation Procedures
66
HC900 Hybrid Controller Installation and User Guide
Revision 5
9/03
Step Procedure
Comments
Reference
5
Using the following
reference items:
reference items:
•
Hybrid Control Designer
data
data
•
Documentation Aids
from Appendix A
from Appendix A
•
Labels in I/O Terminal
Block assemblies
Block assemblies
•
Wiring diagrams given
in this Section for each
type of I/O module
in this Section for each
type of I/O module
connect I/O wiring to the
terminal blocks for each IO
module.
terminal blocks for each IO
module.
Route wires through the
channel at left of the
terminal block, to exit
through the top or bottom
of the block.
channel at left of the
terminal block, to exit
through the top or bottom
of the block.
Barrier Terminal Block
Euro Terminal Block
6
Insert a wire-tie into the
top and/or bottom end of
the terminal block.
top and/or bottom end of
the terminal block.
Form a bend in each wire
to provide strain relief, and
secure the wire bundle with
the tie.
to provide strain relief, and
secure the wire bundle with
the tie.