Multi-Tech Systems MTS2SA-T ユーザーズマニュアル
Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
37
Serial Commands – Setup
Command Syntax
set serial [s1] modem dialing-trig-mode <none/dtr/command>
Description
Sets the dialing trigger mode for the modem port S1.
If dialing trig mode is none:
The serial interface will initialize the modem and dial as per the configured
If dialing trig mode is none:
The serial interface will initialize the modem and dial as per the configured
parameters.
If dialing trig mode is dtr:
As soon as a serial device is connected to S0 (DTR goes high), the S1
As soon as a serial device is connected to S0 (DTR goes high), the S1
serial interface will initialize the modem and dial as per the configured
parameters.
parameters.
If dialing trig mode is command:
The serial interface will dial only on demand. The possible commands that
The serial interface will dial only on demand. The possible commands that
can trigger the link are:
•
"linkup s1" command is issued
•
Application trigger (SMTP, POP3 Client, etc)
Note:
This command triggers a reboot upon save.
Default Value
Command
Success
OK
Error
1. Too few arguments
"Usage: set serial s1 modem dialing-trig-mode <none/dtr/command>
Type 'set serial s1 modem dialing-trig-mode ?' for more information"
2. Invalid string
"error: Invalid string
2. Invalid string
"error: Invalid string
Type 'set serial s1 modem dialing-trig-mode ?' for more information"
Command Syntax
set serial s1 modem country-code <value>
Description
Sets the modem country code value to <value>.
This command is valid only for port S1.
This command is valid only for port S1.
Default Value
-
Success
OK
Error
1. Too few arguments
“Usage: set serial s1 modem country-code value <value>
Type ‘set serial s1 modem country-code value ?’ for more information”
Command Syntax
set serial [s0/s1] modem hangup-string <hangup-str>
Description
Sets the Modem hang-up string.
Triggers for a reboot upon save.
Triggers for a reboot upon save.
Default Value
+++ATH0
Success
OK
Error
1. Too few arguments
"Usage: set serial s0/s1 modem hangup-string <hang-str>
Type 'set serial s0/s1 modem hangup-string ?' for more information"