Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 4 – Command Line Interface (CLI) 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

Configures the modem initial strings. 
Init-num can range from 1-5. 
Triggers for a reboot upon save. 

Set serial s0 modem init-string 1 ATZ 

      

Set serial s0 modem init-string 1 "ATZ AT&F" 

Use double quotes if more than one word is used in the <init-str>. Refer to 
example 2 above. This holds true for all the following commands that need 
a string as a parameter. 

Default Value 

Init-string 1 is set to 'ATZ' 
Init-string 2 is set to ' ' 
Init-string 3 is set to ' ' 
Init-string 4 is set to ' ' 
Init-string 5 is set to ' ' 

Success 

OK 

Error 

1.  Too few arguments 
 

"Usage: set serial s0/s1 modem init-string <init-num> <init-str> 

 

Type 'set serial s0/s1 modem init-string ?' for more information" 

 Invalid 

init-num 

 

"ERROR: init-num range supported : [1-5]" 

 
 

Sets the modem OK string. 
Triggers for a reboot upon save. 

Default Value 

OK 

Success 

OK 

Error 

1.  Too few arguments 
 

"Usage: set serial s0/s1 modem ok-string <ok-str> 

 

Type 'set serial s0/s1 modem ok-string ?' for more information" 

 
 

Sets the modem ring string. Triggers for a reboot upon save. 

Default Value 

RING 

Success 

OK 

Error 

1.  Too few arguments 
 

"Usage: set serial s0/s1 modem ring-string <ring-str> 

 

Type 'set serial s0/s1 modem ring-string ?' for more information" 

Sets parity to even/odd/none. 

Default Value 

None 

Success 

OK 

Error 

1.  Too few arguments 
 

“Usage: set serial s0/s1 parity <even/odd/none> 

 

Type ‘set serial s0/s1 parity ?’ for more information” 

2.  Invalid parity setting 
 

“error: parity supported: [even/odd/none] 

 

Type ‘set serial s0/s1 parity ?’ for more information”