Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 4 – Command Line Interface (CLI) 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

Sets a login-string to the serial port. This command is valid only for port S0. 
The Login string can be of length maximum 8 characters. 
Upon module boot-up, Login is displayed on the console only if the 
characters entered match the login-string configured.  

 This is applicable only if the "set serial s0 auto-dialin trig-mode" is 

char 

Default Value 

"" 

Success 

OK 

Error 

1.  Too few arguments 
 

“Usage: set serial s0 login-string <login-string> 

 

Type ‘set serial s0  login-string ? for more information” 

2. Invalid string 
 

“ERROR: Invalid string  

 

Type ‘set serial s0 login-string ? for more information” 

3.  If ‘set serial s1 login-string <login-string>’ is given 

“error: Command not supported on modem port s1” 

 
 

Enables/disables raw mode support for serial auto dial-in on the device port 
S0. 

Default Value 

Disabled 

Success 

OK 

Error 

1.  Too few arguments 
 

“Usage: set serial s0 raw-dialin <enable/disable> 

 

Type ‘set serial s0 raw-dialin ? for more information” 

raw-dialin 
raw-dialout 

3. Invalid string 
 

“ERROR: Invalid string  

 

Type ‘set serial s0 raw-dialin ? for more information” 
If ‘set serial s1 raw-dialin <enable/disable>’ is given 
“error: Command not supported on modem port s1” 

 

Enables/disables raw mode support for auto dialout on the device port S0. 

Default Value 

Disabled 

Success 

OK 

Error 

1.  Too few arguments 
 

“Usage: set serial s0/s1 raw-dialout <enable/disable> 

 

Type ‘set serial s0/s1 raw-dialout ? for more information” 

raw-dialin 
raw-dialout

 

3. Invalid string 
 

“error: Invalid string  

 

Type ‘set serial s0/s1 raw-dialout ? for more information” 

4.  If ‘set serial s1 raw-dialout <enable/disable>’ is given 

“error: Command not supported on modem port s1”