Enterasys Networks 1G58x-09 ユーザーズマニュアル
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-59
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
•
If detail is not specified, summary information will be displayed.
•
If ip_address is not specified, OSPF neighbors will be displayed for all IP
addresses configured for routing.
addresses configured for routing.
•
If vlan_id is not specified, OSPF neighbors will be displayed for all VLANs
configured for routing.
configured for routing.
Example
This example shows how to use the show ospf neighbor command:
provides an explanation of the command output.
detail
(Optional) Displays detailed information about the
neighbors, including the area in which they are neighbors,
who the designated router/backup designated router is on the
subnet, if applicable, and the decimal equivalent of the E-bit
value from the hello packet options field.
neighbors, including the area in which they are neighbors,
who the designated router/backup designated router is on the
subnet, if applicable, and the decimal equivalent of the E-bit
value from the hello packet options field.
ip_address
(Optional) Displays OSPF neighbors for a specific IP
address.
address.
vlan vlan_id
(Optional) Displays OSPF neighbors for a specific VLAN.
This VLAN must be configured for IP routing as described
in
This VLAN must be configured for IP routing as described
in
.
Matrix>Router#show ip ospf neighbor
ID Pri
State
Dead-Int Address
Interface
182.127.62.1 1
FULL
40
182.127.63.1 vlan1