Enterasys Networks 1G58x-09 ユーザーズマニュアル
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-57
Example
This example shows how to display all OSPF related information for VLAN 1:
provides an explanation of the command output.
Matrix>Router#show ip ospf interface vlan 1
Vlan 1 is UP
Internet Address 182.127.63.2 Mask 255.255.255.0,Area 0.0.0.0
Router ID 182.127.64.1,Network Type BROADCAST,Cost: 10
Transmit Delay is 1 sec,State BACKUPDR,Priority 1
Designated Router id 182.127.62.1, Interface addr 182.127.63.1
Backup Designated Router id 182.127.63.2,
Timer intervals configured, Hello 10,Dead 40,Wait 40,Retransmit 5
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 182.127.63.1 (Designated Router)
Table 13-4
show ip ospf interface Output Details
Output
What It Displays...
Vlan
Interface (VLAN) administrative status as up or down.
Internet Address
IP address and mask assigned to this interface.
Router ID
Router ID, which OSPF selects from IP addresses
configured on this router.
configured on this router.
Network Type
OSPF network type, for instance, broadcast.
Cost
OSPF interface cost, which is either default, or assigned
with the ip ospf cost command. For details, refer to
with the ip ospf cost command. For details, refer to
.
Transmit Delay
The number (in seconds) added to the LSA (Link State
Advertisement) age field.
Advertisement) age field.
State
The interface state (versus the state between neighbors).
Valid values include BACKUPDR (Backup Designated
Router), and DR (Designated Router).
Valid values include BACKUPDR (Backup Designated
Router), and DR (Designated Router).
Priority
The interface priority value, which is either default, or
assigned with the ip ospf priority command. For details,
refer to
assigned with the ip ospf priority command. For details,
refer to
.
Designated Router
id
id
The router ID of the designated router on this subnet, if one
exists.
exists.
Interface addr
IP address of the designated router on this interface.