Vidikron 30ET ユーザーズマニュアル
Vidikron Vision 30 Series Owner’s Operating Manual
29
PRE
L
IMINAR
Y
3.12
Installing and Adjusting
the CineWide Anamorphic
Lens
Installing and Adjusting
the CineWide Anamorphic
Lens
If you are installing a CineWide-equipped projector, proceed as follows to install and adjust
the anamorphic lens.
the anamorphic lens.
The Anamorphic lens mount kit consists of everything shown in Figure 3-11. If any items are
missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at
(888) 4VIDIKRON.
missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at
(888) 4VIDIKRON.
Figure 3-11. Anamorphic Lens Mounting Assembly - Exploded View
It is extremely important that the primary lens is properly adjusted
before you install the anamorphic lens. Ensure that the image from
the primary lens is perfectly centered on the screen.
before you install the anamorphic lens. Ensure that the image from
the primary lens is perfectly centered on the screen.
Note
7 Pitch/Y-Adjustment
Screw, 4-40 x 5/16"
(4x)
Screw, 4-40 x 5/16"
(4x)
6 Fender
Washer (4x)
Washer (4x)
2 Mounting Bracket (2x)
8 Base Plate Mounting
Screw, Phillips,
M6 x 1.0 x 16mm (2x)
Screw, Phillips,
M6 x 1.0 x 16mm (2x)
3 Anamorphic Lens
1 Base Plate
5 Fiber Washer (2x)
4 Yaw/Z-Adjustment Knob (2x)