Epson S1D13504 ユーザーズマニュアル
Epson Research and Development
Page 3
Vancouver Design Center
13504PWR Software Suspend Power Sequencing Utility
S1D13504
Issue Date: 01/02/01
X19A-B-007-04
13504PWR
The 13504PWR Software Suspend Power Sequencing Utility enables or disables the S1D13504
software suspend mode and LCD.
software suspend mode and LCD.
Refer to the section titled “LCD Power Sequencing and Power Save Modes” in the S1D13504
“Programming Notes and Examples” manual, document number X19A-G-002-xx. Also, refer to the
S1D13504 “Functional Hardware Specification,” document number X19A-A-002-xx for further
information.
“Programming Notes and Examples” manual, document number X19A-G-002-xx. Also, refer to the
S1D13504 “Functional Hardware Specification,” document number X19A-A-002-xx for further
information.
The 13504PWR display utility must be configured and/or compiled to work with your hardware
platform. Consult documentation for the program 13504CFG.EXE which can be used to configure
13504PWR.
platform. Consult documentation for the program 13504CFG.EXE which can be used to configure
13504PWR.
This software is designed to work in both embedded and personal computer (PC) environments. For
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically this is done by serial communications, where the PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically this is done by serial communications, where the PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
S1D13504 Supported Evaluation Platforms
13504PWR has been tested with the following S1D13504 supported evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332
processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the S1D13504 “Programming
Notes and Examples” manual, document number X19A-G-002-xx.
Notes and Examples” manual, document number X19A-G-002-xx.
Installation
PC platform: copy the file 13504PWR.EXE to a directory that is in the DOS path on your hard
drive.
drive.
Embedded platform: download the program 13504PWR to the system.