HP (Hewlett-Packard) 620n ユーザーズマニュアル

Installation Procedures 14

ENWW

If your network requires that you configure network settings on the 
print server before you add the printer to your network systems, 
you can do so now.  

However, in most cases, you can skip this section. Instead, you can 
proceed directly to 

. Use network installation software to both configure basic 

network settings on the print server, and add the printer to your 
system configuration. 

●

For Microsoft Windows 
systems, use the network 
setup software on the CD-
ROM supplied with your 
printer (recommended), or 
on the HP Jetdirect 
CD-ROM supplied with 
the print server. This 
software will allow you to both configure the print server for 
operation on your network and add the printer to your system. 
See 

Printer CD-ROM software may not support printer 
setup on Novell NetWare or other networks. See 
your printer documentation for supported 
networks.

●

For TCP/IP networks, use 
a Web browser to access 
the embedded Web server 
on the HP Jetdirect print 
server. The Web pages on 
the print server allow you 
to configure network 
parameters.  

(Recommended) Use your 
network-ready printer 
CD-ROM.

Or, use the HP Jetdirect 
CD-ROM.

EIOSG.book  Page 14  Thursday, October 9, 2003  1:42 PM