DELL 8132 ユーザーズマニュアル

Data Center Bridging Commands

Use the datacenter-bridging command for an ethernet interface in order to 

enter the DataCenterBridging mode. Priority-Flow-Control is configurable 

from within the DataCenterBridging mode. 

This command has no default configuration.

Interface Configuration (Ethernet) mode

Datacenter bridging mode is only available on physical interfaces, not on 

port-channel interfaces. To ensure proper operation, users must configure all 

physical interfaces in a port channel to have the same data-center bridging 

configuration.

console#config

console(config)#interface range ethernet all

console(config-if)#datacenter-bridging

console(config-if-dcb)#priority-flow-control mode on

console(config-if-dcb)#priority-flow-control priority 1 no-drop

2CSPC4.X8100-SWUM102.book  Page 878  Friday, March 15, 2013  8:56 AM