Chicago Electric 42933 ユーザーズマニュアル

SKU 42933 

Page 12

Elevating Handle (88)

Yoke Pivot Clamp Handle (88)

Safety Guard (10)

Arm Index Knob (115)

Screw Clamp (137)

Switch (122) with Key (98)

Trigger

Bevel Index Knob (74)

Bevel Lock Knob (71)

Lock On Button

Safety Guard Lock Knob (5)

Anti-kickback Arm (13)

On / OFF Switch – The Switch has a built-in 

locking feature which requires a key to be 

inserted before the saw can be turned ON. 

Removing the Key and pushing the OFF but-

ton locks the saw against unintended use. 

For crosscutting, press the green Switch in, 

then squeeze and hold the Trigger. For rip 

cutting, press the green Switch in, squeeze 

the Trigger (motor starts), then push up on 

the Lock On Button (for rip cutting only) to 

keep the motor running without holding the 

Trigger  in.  Depressing  the  Trigger  again 

will release the Lock On Button, turning the 

motor off.

carriage Lock – The Carriage Lock Knob 

located on the left side of the Radial Arm, 

permits the saw assembly to be moved 

in or out, and locked at the desired posi-

tion on the arm. It must be fully released 

for any crosscutting, and tightly locked for 

all operations in which the saw assembly 

is stationary. To lock turn clockwise.  To 

unlock turn counterclockwise.

Arm Angle – The Arm Index Knob (142) 

and Washer (140) are located at the Col-

umn Base (132). They can index, release,