Mitsubishi Electronics FR-F700-NA ユーザーズマニュアル

· Set "1" in ALLC all parameter clear to initialize all parameters. (Parameters are not cleared when "1" is set in Pr.

77 Parameter write selection.)  

0

Not executed.

1

All parameters return to the initial values. Refer to the list of parameters on page 390 for 
availability of parameter clear.

 and 

 are displayed alternately ... Why?

The inverter is not in the PU operation mode.

1. Press .

 is lit and the monitor (4 digit LED) displays "0" (Pr. 79 = "0" (initial value)).

2. Carry out operation from step 6 again. 

1.

Screen at powering ON

     The monitor display appears.

Display

Operation

3.

Press        to choose the parameter 

     setting mode.

7.

Press        to set.

5.

Press        to read the present set 

     value. 

     "    "(initial value) appears.

PU indication is lit.

2.

Press         to choose the PU operation 

     mode.

· Press         to read another parameter.

· Press         twice to show the next parameter.

· Press        to show the setting again.

4.

Turn        until               (all parameter 

     clear) appears.

6.

Turn         to change it to

 the setting value "   ".

The parameter 
number read 
previously appears.