Briggs & Stratton 5900834 ユーザーズマニュアル

 4.  Loosen and remove the four (4) allen head screws 

(A, Figure 58) that secure the choke and throttle 
cable plate (B) to the dash panel assembly.

 5.  Loosen and remove the two (2) allen head bolts 

(A, Figure 59) that secure the top motion control 
guard (B) to the unit.  Remove the top motion 
control guard from the unit

 6.  Loosen and remove the 1/4 bolts (C) and washers 

(D) that secure the cable plates (E) to the operator 
compartment.  Pull the cables plates and cables 
towards the side of the machine to remove the 
cables plates from the unit.

 7.  Remove the eyebolt hardware (B, Figure 60) 

that secures the eyebolt (C) to the ground speed 
control lever arm (A).

Regular Maintenance

Not 

for  

Reproduction